 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ACTIVE SIGNAL AMPLIFIER Vin&Vout T55/56/65/66_D/S DESCRIPTION The series is a high integration, efficiency polygonal-line active high isolation PRODUCT PROGRAM Part Number T5530D/S T5533D/S T5630D/S T6530D/S T6630D/S T6650D/S Power Supply 24V 24V 24V 24V 24V 12V Input 0-10V 0-10V 0-10V 0-5V 0-5V 0-5V Output 0-10V 0-10V 0-5V 0-10V 0-5V 0-5V Isolation Power Channels Output NONE 24V NONE NONE NONE NONE 1 1 1 1 1 1 amplifier module, with anterior circuit voltage signal input and posterior voltage signal output. These modules are embed with a high efficiency isolated micro-power source, which can provide a electrics-feed for signal input .In the two-wire three-wire and four-wire circuit applications, our products largely predigest customers' design helpfully improve the using room ratio of PCB .Adopting electromagnetism isolation technology, it is available to keep high accuracy and natural extrem ely low temperature drift. The isolation voltage among the input, output, power supply and isolated power output can up to 2.5KVDC. Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS Power Supply Power Supply Data Power Dissipation Power Protection Isolation Power Output Data Output Voltage Output Current Input Signal Input Data Input Impedance Overload Output Data Output Signal Load (Nominal Power Supply) 5% 2W Reverse protection (Nominal) 10% 25mA See above 10M 30V See above 1K(At output=max) FEATURES Three-port isolation Among input, output and power supply High accuracy (0.1% F.S.) High linearity (0.1% F.S.) Isolation voltage(2500VDC/60S) High frequency response(15KHz) Extremely low temperature(35PPM/ ) Industry standard(Operating Temperature Range:-25C to 71C) High reliability(MTBF500,000 hours) TRANSMISSION CHARACTERISTICS Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./(-25 to +71) ISOLATION CHARACTERISTICS MODEL SELECTION Galvanic Isolation Isolation Voltage Insulation Resistance Package style Isolation power output Power supply Output Input Isolation amplifier Three-port isolationAmong input, output and power supply 2.5KVDC (Tested for 1minute and 1mA max, humidity<70%) 1000M, 500VDC(Among signal input ,signal output and power supply) TXXXXD OTHER CHARACTERISTICS Ambient temperature Package Weight Operation temperature:-25C to +71C Transport and Storage temperature:-50C to +105C DIP24/SOIC24 About 10g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com The Environment in use Note: 1. All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions. The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T55/56/65/66_D/S A/2-2008 Page 1 of 2 SCHEMATIC DIAGRAM 24Power supply 23+ 13Is olatio n Power O utput 14+ Vin12Signal input 11+ Vin+ 3+ Signal ou tput Vout1Vout+ APPLICATION NOTE 1. Please read instruction book carefully before using the product. If you have any question, please contact with our technical support. 2. Please don't install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden.. 4. Don't divide the product privately in case the equipments ineffective or go wrong. AFTER SERVICE APPLICATION CIRCUIT DIAGRAM 1. Products are carefully inspected and controlled before going out from our factory. If they operated abnormally or there were something wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. Power Supply Isolation Power Output 24 23 22 21 20 PinPin+ NC NC NC 16 15 14 13 NC NC PoutPout+ 2. 3 years warranty since the delivery date. During the period of quality guaranteeour company will repair or change free of charge if product has any quality problem in the process of normally using. Input SoutNC Sout+ NC NC 12345 NC NC Sin + Sin - TxxxxD 9 10 11 12 APPLICATION CIRCUITS See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. Output PACKAGING SIZE AND TERMINAL DESCRIPTION First Angle Projection SOIC Package 10.20 (0.397) 10.20 (0.397) DIP Package 4.00 (0.157) 0.70(0.028) 27.94 (1.100) 32.30(1.272) 32.30(1.272) 18.60(0.732) 14.40 (0.560) 0.30 (0.012) 1.150.15 (0.0450.006) 16 15 14 13 24 23 22 21 20 14.40 (0.560) RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) 24 23 22 21 20 16 15 14 13 19.24 (0.757) 2.00 0.079 Vin- Vin- 12345 1234 5 9 10 11 12 9 1011 12 1.00 0.039 Pin Connection PIN FUNCTION OutputOutput+ Input+ 24(Vin-) Others Isolation Power OutputNC:No Connection Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:0.10mm( 0.004inch) General tolerances :0.25mm( 0.010inch) PIN FUNCTION Isolation Power Output+ Power Supply+ Power SupplyNC The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T55/56/65/66_D/S A/2-2008 Page 2 of 2 0.65 (0.026) |
Price & Availability of T5530D-S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |